Huma-Air shroud with integrated moderator for Bsa Airrifles
Huma-Air shroud or bullbarrel with intergrated silencer for Bsa airrifles. Will fit all models with straight breech. Wil make your Bsa whisper quiet. (These shroud were previous sold as Huub Shrouds)
Huma-Air shroud with integrated moderator for Bsa Airrifles (Previously sold as “Huub Shrouds”)
These shrouds will fit any of the Bsa multi-shot PCP rifles with a straight front breech.  (not suitable for S10 and some of the very early low breech single shot rifles and rifles with an angled breech at the front)
Not only do they look good but they also work very well at quietening down the muzzle report of BSA PCP air rifles. When the baffles have been fitted in the best configuration, the shrouds are as quiet or quieter than most off the shelf silencers/moderators. For the maximum performance in quieting your rifle the shrouds are made caliber specific.
They are easy to DIY fit or they can be fitted while your rifle is with me for other work.
They are made out of 27mm OD aluminum tube to keep the weight down, then sand blasted and matte black anodized.
The fitting is directly on the barrel and the fitting screws are covered by the shroud when it is screwed on.
The shrouds are made to be around 140mm (5.5″) longer than the end of your barrel. The longer they are the more internal volume there is, which translates to a quieter muzzle report.
Please be aware that the shroud is a little higher than the top of the scope rail, so check you scope rings before you assemble the shroud.
We have the 3 most popular lengths for BSA in stock:
–Â the 12″ barrel model (R-10 Super Carbine and Ultra), they are around 15″ (380mm) long overall
–Â the 15″ model (standard R-10 and Scorpion), they are around 18″ (465mm) long overall
– the 18.5″ model (standard on the FAC/Export Scorpion and FAC/Export R-10), they are around 21.75″ (550mm) long overall.
How to measure your barrel length >here<
They are supplied with the shroud tube, barrel adaptor, back-flow bush, baffles, steel wired curlers, and sound reducting felt.
At this stage they are only suitable for barrels that have a threaded end for a moderator.
Huma-Air shroud fitting video made by XTX-Air in the UK
Watch out for imitation/rip-off copies of the Huma-Air shrouds being sold by some people online and on eBay, buyer beware!
Specifications
| Brand | |
|---|---|
| Model | |
| Diameter (mm) | |
| Barrel length (mm) | |
| Material | |
| Colour |
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
64 reviews for Huma-Air shroud with integrated moderator for Bsa Airrifles
Related products
-
Select optionsElement Optics Helix 4-16×44 FFP Riflescope
€459,00(incl. 21% VAT)In stock
-
Add to cartRebuild kit for your regulator
€6,95(incl. 21% VAT)In stock
-
Add to cartAirgun Lube Silicone Grease
€6,96(incl. 21% VAT)In stock
-
Add to cartEagle Vision Infinity Adjustable Scope Mounts IPS 30 mm Weaver Picatinny
€96,96(incl. 21% VAT)In stock
Alternative products
-
Select optionsModular Air Moderator MOD50-4/0 Avalanche (Standard)
€189,00(incl. 21% VAT)In stock
-
Select optionsModular Air Moderator MOD50-4/0 (Standard)
(incl. 21% VAT)€189,00€151,19In stock
-
Add to cartMOD50 Moderator Insert Avalanche- High Power (40 mm Module)
€11,51(incl. 21% VAT)In stock
-
Add to cartMOD50 Moderator Insert Avalanche- High Power Startmodule
€14,96(incl. 21% VAT)In stock
Nigel Wilmot –
Easy to fit, excellent build quality, effective sound moderation, vastly improves the appearance of my BSA Ultra SE.
Highly recommended.
Paul McCarville (verified owner) –
Just ordered mine on the run up to Christmas (Dec 13th) and I was amazed that I received the product within 3 days (to the USA from Germany at Christmas time!).
Fantastic build quality and performance, a very solid and well performing product!! very easy to install too!
Thanks!!
Stephen (verified owner) –
Very happy with the product i bought the huma shroud for my BSA made it a little quieter did not really buy it for that wanted the compact look was not disappointed with the well made quality product thanks guys
Timothy Grugeon (verified owner) –
Well made, self explanatory fitting in less than ten minutes. Looks the dogs danglies and it is whisper quiet. The loudest thing is the pellet impacting the target. Perfect for back garden plinking or hunting. Arrived in about ten days.
David Brown (verified owner) –
Extremely well made, easy to assemble and fit. Whisper quiet. Very well thought out at design stage.
vic (verified owner) –
This silencer shroud for my BSA Goldstar SE .177.Fits like glove and very good quality paint.When you pull the trigger i tell you what this BSA .177 it whisper. Five Stars***** I recommend it!
Phil in OKC (verified owner) –
I did order another shroud for my BSA Scorpion Multi-shot and it performed just like my R10 . . . very quiet (back yard friendly) and shortened the overall length of the rifle. If you own a BSA rifle and you are not satisfied with either the looks of your stock (or aftermarket) moderator or its effectiveness on quieting the muzzle retort, then seriously consider getting this shroud with internal moderator. It is easy to install, and no cutting of anything to make it work and look perfect.
Jules (verified owner) –
I purchased this shroud a few weeks ago to replace the moderator I had. Its an excellent bit of kit and noticeably quieter than the mod I was using. Really easy to fit as well. The customer service from Huma was first class and delivery was really quick. Will be buying from them again
Keith Mahoney (verified owner) –
A good product. Easy to fit, looks and sounds good and it arrived under three weeks from order. Very pleased
Phil in OKC (verified owner) –
This Huma Air Shroud with integrated moderator is hands down, the most effective and best looking sound deadening system I have found. I thought the stock moderator and shroud was quiet on my .177 BSA R10 FAC but this system shortens the length of the rifle and makes it whisper quiet, as we say in the U.S., “backyard friendly. There was zero shortening and clipping of the wire inserts on my rifle as shown in the installation video. I am now going to order one for my BSA Scorpion Multishot.
Dave D (verified owner) –
Very rapid delivery to the uk , easy to fit and very effective
Paul Molland (verified owner) –
I bought huma shroud and it was delivered quickly with no problems it was well packaged and very easy to fit the difference between the huma shroud and the moderator was amazing not only does it make next to no noise but it looks fantastic to great service and product
H.J.M. (verified owner) –
Na uitgebreid overleg uiteindelijk toch de shrout besteld voor mijn Goldstar se.
De speling tussen de drukbuis en de shrout is idd. minimaal, maar het past en werkt super!
Mooi afgewerkte set, netjes verzorgd, denk niet dat er een betere oplossing te vinden is.
Crispin Fernandez (verified owner) –
I’ve been looking around for silencer or shroud for days & somehow I stumble on this shroud. So I did my digging & saw the pic. WOW! LOOKS CLEAN! & red some of the reviews. Well. Didn’t take long so I ordered it the price was excellent & Didn’t take long within 3 days it was delivered to the USA! Instruction and installation was easy! No Brainer! So excited to fire this gun and I was amazed it’s super quiet & no clipping ! Quality on this shroud said it all! Buy it! Thanks HUMA AIR!!!
Chris (verified owner) –
Very nice clean looking shroud all grub screws are hidden looks factory makes a good reduction in sound pretty much just hammer spring noise left and protects barrel I would definitely buy again.delivery takes a while but it’s definitely worth the wait.
Wayne (verified owner) –
Excellent bit of kit, reduced my R10 down to just the noise of hammer spring, also was pleasantly surprised that the 3rd baffle didn’t need cutting down as the xtx fitting video suggested. Also reduces the standard size R10 by over 1.5″ overall. Very happy 🙂
Also, arrived in about 2 weeks which was also a surprise
Les B (verified owner) –
Arrived today fitted easily within 15 mins no issues , makes a big difference , had a LEI moderator fitted which worked well shroud looks great very quiet , the Gold star has a bit of a loud bark , has now made it acceptable for use plinking in the garden .
Thanks
Brian W. (verified owner) –
The quality of this piece is first rate. Works VERY well and gives the R10 a much more pleasant tone than the original shroud or any moderator that I have tried. I liked it so well, that I have one one the way for my Ultra.
Bas W (verified owner) –
Recently received my 4th shroud. Now both my BSA Scorpions, the Ultra and the Goldstar are fitted with this part. Easy to fit and even on a 29 FPE .22 just as silent as with a Weihrauch silencer. All of my BSA’s are still spot on; love them and the Huma parts!
Anthony Clark (verified owner) –
Shroud was excellent fitted well and made my r10se very quite and excellent quality and service
Steve (verified owner) –
Very nice fit and finish, nothing needed modding, bolted right on. Effective operation. Excellent all around.
Stuart (verified owner) –
Brilliant bit of kit easy to fit and very good quality parts recommed this shroud highly if only they made them for the BSA S10 I’d have one more
Robert Whitley (verified owner) –
Shroud did the trick for my .177 BSA Ultra se. I would highly recommend.
john mcphee (verified owner) –
this item was really easy to fit 10 minutes max. i dont know how it performs as i have not used my rifle since installation due to bad weather.
Martin (verified owner) –
Excellent, arrived well before I was expecting it, easy to add to rifle and very quiet, I did however have to trim one of the mesh coils so it would fit, there is a video showing how to do it, highly recommended
gary money (verified owner) –
Top class work expertly engineered and a fantastic design easy to put together with a step by step instruction video excellent
Paolo (verified owner) –
I bought this shroud for my Buccaneer SE and tested it at shooting range, home and in the field, it turned out to be the best choice and money spent for my AirRifle.
So look no further and get yours!
Let’s start from the Efficiency:
– it’s a very easy DIY fit (watch video tutorial)
– it’s 10 dB lower compared to BSA moderator I own
– increase positively pellet trajectory
Benefit:
– keeps your Barrel nice and cozy from rusting
– no longer need for BarrelBand
– improve balance in the AirRifle
– your AirRifle gets a brand new Look
– will fit in any hard or soft case with 110cm length
Engineering:
– well designed to the last detail
– inner diameter fit perfectly on the Barrel helping to hold the barrel straight and steady
– solid & strong aluminium BullBarrel
– shroud and moderator’s rings designed specifically per each calibre
Overall a MUST HAVE for BSA AirGuns Owner!
Very well received and appreciated. Thank You Huma-Air!
Adam Boulton (verified owner) –
It tuck 4weeks to get to me but boy it was worth the wait has transformed the look of the rifle and very easy to fit carnt wait to use it
Michael (verified owner) –
Superbly engineered and finished piece of kit which fits perfectly and is quieter than the original sound moderator. It also greatly improves the look and balance of the rifle
DavidC (verified owner) –
Nicely made parts and match BSA’s finish. Perfect fit on my BSA R-10 TH. Super quiet. I did a dB check without moderator, with factory moderator and with Huma’s shroud/moderator, the Huma parts are much quieter than the factory installed moderator. Very easy to install. Aesthetically, I think the Huma-Air Shroud improves the appearance of the R-10 as well. Next upgrade will be the Huma-Air Regulator. Thank you!
M Bailey (verified owner) –
Easy to fit and made the gun look and feel alot better.
And also deals with not having to fit a moderator every time the gun was taken out of the sling.
Very impressed with the shroud.
H. Sason (verified owner) –
Easy to install with perfect fit. Now quieter than my previous set up and looks sleeker.
David Clark (verified owner) –
Fantastic bit off engineering ,do you do a extra piece to make it even quieter as I use it in the back garden,and it’s pretty quiet now kind regards David
Jeroen (verified owner) –
Fits nicely on my Gamo Coyote (47cm barrel). There is only a small gap at the breech which looks perfectly fine if you turn it towards the barrel. Most importantly the performance is great, much more silent than with the silencer. Instead of the bark that the Coyote is known for all you hear now is the mechanical action when you pull the trigger. Works great and also looks the business!
Gaz turner (verified owner) –
Very pleased well engineered and fast postage. Had a weirauch silencer on my bsa ultra se replaced it with the shroud and it was quiet before but I think the shroud is slightly quieter looks the business aswell highly recommended.
william mcconachie (verified owner) –
hi shroud fits fine a bit longer than the original looks good
Caspar Wingelaar (verified owner) –
Fits very nice. Looks very good too.
My rifle is very quiet now. Like it very much.
John Robinson (verified owner) –
Excellent product, very well engineered, extremely high quality and so much easier to install than expected (no cutting or shortening required at all for the internal baffles on my 15″ barrel kit). Noise levels experienced with my BSA Gold Star (.177cal) after fitment of the shroud at least comparable to if not better than the very best Weihrauch and BSA silencer/moderator opposition. Gives the gun so much cleaner lines – looks superb! – totally agree with other buyers that it really does look like an original fitment item. The Huma-Air support team are top drawer as are their communications and delivery/tracking processes, so thank you very much for such a straightforward purchase and I would happily do business again.
John (verified owner) –
Fitted within 20 mins of arrival, the Black Matt finish looked a little uneven but after cleaning with my gun oil rag it was perfect. The noise reduction over the BSA supplied suppressor is amazing, around 8 dBs quieter. Fitted to a .177 R10 mk2 Carbine 300mm barrel.
John Jones (verified owner) –
Good purchase, its relatively simple to install and certainly looks the part. The integrated moderator is about the same as the one I had in terms of quietening the muzzle crack and now it is possible to fit a longer air cylinder if I wish. The only downside is that barrel cleaning will be a longer process as the moderator would have to be taken out and refitted after. on the whole I am very pleased.
Ray (verified owner) –
Excellent quality product, easy DIY fitting and silent. Highly recommended.
Carlos (verified owner) –
Really quiets the gun. Great
Carlos Neto (verified owner) –
Really silenced the rifle, great product.
Mark Hall (verified owner) –
The Huma-Air BSA shroud is top quality fits really well and very quiet, the Huma-Air support team are are top quality and respond very quickly to any issues you may have are very good with their Track and Trace system overall all it was a pleasure to buy from them very quick response times for delivery top quality product, great team, good communication thank you very much keep up the good work I will certainly buy from them again.
Giles Hodges (verified owner) –
Bought along with the Huma regulator. Easy to fit, have to cut the last roller down a bit as described by XTX Air on YouTube, but was easy enough. Doesn’t appear to be any louder than the BSA shroud with moderator and looks better, so all good. Bought for my 15″ barrel BSA R10 mkii 2013.
Robert Bolton (verified owner) –
Excellent bit of kit. Fitted in about 3 minutes. Quieter than bsa silencer. Looks as though it is factory made part of the gun. Highly recommended.
Moz chops (verified owner) –
Nifty piece of kit very easy to install, looks fantastic and best of all works a treat.
Paul (verified owner) –
What more can I saw, that hasn’t already been said.
This is a well made item. Securely packed and received, in the UK, four (4) days from ordering. A good service at any time. Even more surprising, due to the current situation (COVID-19).
Now, the Shroud itself.
I ordered this for my BSA R10 Mk2. .177
This was ordered together with a Hume Regulator. (Reviewed elsewhere).
I’ll be honest. I did not come here to buy a shroud but, seeing it presented, when I chose my Regulator and reading the good reviews here. I thought, ‘why not try it?’
I’m certainly glad I did.
Well made, with a smooth non-glare finish. This shroud, was easy to fit.
In my opinion, making the BSA R10 look even more smart and functional, with it’s inbuilt silencer (suppressor).
Personally, I wouldn’t say it was quieter than the BSA Silencer but, not any louder.
I can highly recommend this product. another quality product from Huma.
Dave (verified owner) –
Great looking shroud, easy to fit and quieter than the bsa shroud fitted to the R10 SE that I have
Paul (verified owner) –
Really well engineered and manufactured shroud that was very simple to fit having read the instructions and found a youtube video. The gun is now seriously quiet and much more than with the moderator I had fitted. On top of doing its job really well it also look cool and provide a great new profile to the Ultra SE. Delivery and comms from Huma were also really good. Highly recommend
Mal Johns. (verified owner) –
I have fitted the Huma Regulator and Shroud to my BSA R10. I now get more shots per fill and the gun is ultra silent since fitting the shroud. Two great pieces of kit for the gun at a great price and customer service is excellent.
Jarno bierman (verified owner) –
Fitted on a Gamo Coyote .22
47cm barrel..
Ok fitment the rear adapter does not fit perfect on the gamo Coyote but it is not made for it..
Easy install and very silent, fitted two peaces of material..
Good quality for the price.
Barrel band needs to be removed
Good service..
Now thinking about the air regulator..
kelly (verified owner) –
fit was perfect on my Gsmo dyna max
LEE MOORE (verified owner) –
NOT ONLY DOES THE HUMA SHROUD LOOK GOOD , BUT IT’S QUIETER THAN THE BSA SHROUD/SILENCER ! EASY FIT .
LEE MOORE (verified owner) –
NOT ONLY DO THEY LOOK GOOD ,BUT THEY ARE QUIETER THAN THE BSA SHROUD/SILENCER !
Andrew Patterson-Jones (verified owner) –
Very nice shroud looks good and nice and quiet definitely recommend
JT (verified owner) –
Great service, much quicker delivery to the UK than expected, and the packaging was perfect.
Great product as well, top marks.
GeeTee (verified owner) –
Received my new shroud for my Ultra SE & now fitted,in my opinion it looks great,is well finished & gives the rifle a more pleasing aesthetic look
Mike D (verified owner) –
I have a BSA ultra, fitted a larger air cylinder, needed a shroud, this one fitted easily, as quiet as a moderator. Used XTX fitting video.Looks Great
eddie (verified owner) –
it is very nice and very easy to fit would recoment your produts to very one keep up the good work
Jack (verified owner) –
Excellent product, also adaptable to gamo coyote
Tim P (verified owner) –
Quality product. Easy diy fit. Tracked delivery. Good service from Huma.
Tony C (verified owner) –
Great service and a fantastic product
shaun hayes (verified owner) –
Excellent very easy to fit just trim end basket on silencer whisper quiet and looks good