FX Impact MKII Tuning Regulator Gen 3 By Huma-Air
Huma-Air tuning regulator Gen3 for the FX impact MKII airrifle as replacement for the factory regulator.
This FX Impact MKII Tuning Regulator by Huma-Air is specially designed as a “one on one” replacement regulator for your FX Impact MKII.
Unfortunately the fixed limited space in the FX Impact MKII action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio’s used by FX.
Nevertheless we have accomplished to make a great replacement regulator which will solve the known issues of the factory made regulator.
This regulator is a replacement for FX regulators with 10 mm belleville springs.
So what can you expect of the Huma-Air FX Impact Tuning Regulator:
Three special pressure ranges are available so you can tune the rifle exactly according to your own wishes
This Huma-Air FX impact regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.
Pressure settings
The design of the regulator makes it posible for setting it exactly to your wishes while placed in you FX impact MKII by watching the output pressure gauge on you rifle.
We have currently two pressure ranges for the FX Impact Gen3 regulator available:
- The extra high pressure range, 135-200 Bar what will suit all calibers within the high power range and for more extreme purposes and very good for the slugs and heavy pellets.
- A low pressure range, 60-135 Bar, what will suit the lower power rifles like the sub 12 ft/lbs versions perfectly.
Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.
When you order your FX Impact MKII regulator you will receive:
- The Gen III tuning regulator by Huma-Air
- The belleville spring set of your choise
- A set of spare valve disk
- We will include a “Huma-Air regulated” breech sticker
- Fitting instructions as pdf download
Huma-Air Quality Control
Huma-Air regulator’s are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
Jim B (verified owner) –
The original AMP regulator gave inconsistent pressures and it had a slow creep. Replacing all the regulator seals and cleaning the contact surfaces didn’t fully resolve the problems. I considered purchasing a brass plunger to replace the original delrin one. However, I decided, instead, to purchase the complete HUMA regulator as it is claimed to be superior to the AMP. This certainly appears to true in my case, as it has resolved the above problems; and the rifle is now very consistent. Having previously worked on the AMP regulator, I found the HUMA one was quite easy to install. I’d definitely recommend it.
Paul S. (verified owner) –
Perfect regulator for OEM replacement. The GEN 3 regulator is easy to install. The pressure can be easily adjusted. De installed pressure level stays a reliable constant level.
Roine (verified owner) –
Det funkar bra. Bättre än originalet
Phil (verified owner) –
I direct OEM replacement for the mk2 impact.
Yes you have to stack the belvil washers, but you can find all the instructions on Huma’s web page
Fantastic quality item from a world class company.
Just buy one, you can thank me after…
Sebastian Haffenberg (verified owner) –
Just perfect together with Impact 0,35 and slugs. Easy to install.
Sergey (verified owner) –
Great quality! Made just great! Fast delivery, very easy installation. Works great! Thanks to the Huma air team!
T.T. (verified owner) –
After three years in my MK2 still works well. Had a creeping issue but good as new after changing the orings and pressure disc.
Jody (verified owner) –
This regulator once tuned properly and installed produces consistency that no other company can achieve. Moreover the customer service, and quality control is on another level at Team Huma air. I would like to say Nick, is a very valuable asset at Huma air! Nick and I have been working on some orders, and he went way beyond his duties to help me. Buy one you won’t regret it.
Ben (verified owner) –
Very nice products from Huma-Air! Installing was very easy. My MKII did not reach the presure setting I was aiming for, I wrote to support of Huma-Air and they solved it with a placement of an extra two belevederes, they are supplied in the standard delivery. Now the pressure is right on spot. No creep and a constant muzzle speed withe a spread of 3 m/s. Very pleased with it.
Colin crook (verified owner) –
All the parts that I have purchased from hums-air have been top notch and worked a treat. The engineering is brilliant. I always go to huma-air first.
André (verified owner) –
I have the low pressure set on this huma regulator set at 70 bar. And it has no creep. And is very consistent especially with the second regulator from huma just like a M3. And when I would like the set, setup for the heavy slugs I can put a set high pressure belvederes in it and run the set at a higher pressure than the standard fx regulator.
Ali (verified owner) –
Perfect, next day shipping
Antonio Sebastián (verified owner) –
The best after sales service I have ever had, I had a problem with the regulator a year and a half later and they solved it without a problem, 5 stars without a doubt, thank you very much for the service, professionalism and excellent quality products.
Jurgen (verified owner) –
Ben er super blij mee en de uit leg was prima te doen
Paulau (verified owner) –
Plus sensible, plus silencieux que celui d’origine, de plus ne monte pas en pression après récupération, même après une semaine…
Juste une variation de pression de 2-3 bars entre bouteille à 250bars et bouteille à 135bars.
Montage très facile.
Parfait.
Gary Edwards (verified owner) –
Your service and reg , both where excellent
Thanks
DeadShot (verified owner) –
Nice upgrade. Easy installation. A lot faster recovery time over stock reg. Very little regulator creep. 2 to 3 bar over long period of time. I definitely recommend if you are having issues with the stock regulator
Robert (verified owner) –
good quality easy installation I recommend
Thanks
Simone (verified owner) –
Purchased the Huma regulator for my Impact, easy to install and a guarantee in terms of quality. Always available to meet our needs.
anthony mcdougall (verified owner) –
When you buy parts from HUMA you are upgrading your rifle to a very high standard. These parts especially for the FX impact makes a huge difference in power and accuracy. Were FX go wrong HUMA tweak it to perfection.
Franck Becanfa (verified owner) –
Fitted the reg to my Impact, but I’m a bit in the deception side.
The reg does creep depending on the internal pressure of the reg.
Above 230 bars I’m a 121 bars.
When runnin under 200 bars the pressure drops to 117-118 bars.
I followed all the process but I’m a little disappointed.
Did anyone experience such an experience or is my gun faulty?
Kat (verified owner) –
The best ,HUMA FOR EVER I have 3 huma regulated and it’s perfectttt thank you huma,♥️
Ray (verified owner) –
Far superior to the standard regulator, no leaks, easy install, precision quality, highly recommended.
bao khanh (verified owner) –
The best handy best pressure regulator I’ve used a cool and unique design
Henrik (verified owner) –
This is an excellent, dependable regulator. Way better than the original.
Wilfried (verified owner) –
Super goed
Ray (verified owner) –
Top kit, if you want the rifle to work the way it was designed to, simply buy this … easy install, I’ve used them for a while now … zero leaks and accurate tuning .. stop thinking about it and get it sorted
Damon (verified owner) –
Far better quality in comparison to the standard FX. Very consistent and excellent fast recovery
Mirek (verified owner) –
Very happy with New Huma Regulator Working perfectly. Great stuff
Richard (verified owner) –
what can i say this regulator is absolutely brilliant.
Ronald Lessard (verified owner) –
Awesome customer service have done business with them in the past and rate them a 5 star and their regulators are the best if you are looking for top performance wish they sent the power plenum for the fx impact I would definitely order from them keep up the great for I will do business with you in the future, thank you so much.
Dave Robinson (verified owner) –
I’ve had a Huma regulator on my BSA R10 for about four years without a hint of a problem. Always returns excellent results., so when I bought an FX Impact Mk2 in FAC I naturally fitted one to that too. The consistency is amazing and has made an already extremely accurate rifle just that bit better. Easy to fit following the instructions and YouTube videos and so simple to set up correctly. Money well spent, again.
Paul (verified owner) –
great . Much better than the fx reg
Radosław (verified owner) –
Super Hiper FX Impact MK II is number one 🙂
wyan (verified owner) –
Very well documented how to install, extremely stable
Chris w (verified owner) –
This is an excellent, dependable regulator. Fitting and adjusting is easy, although i would say the trigger group certainly needs removing for accurate adjustment
The only criticism I have, is why do they use a slot for a flat heat screwdriver on the adjuster screw? This causes more problems than using the fx original hex key for pressure adjustment..
Samuel Orton (verified owner) –
I have owned and used extensively a multitude of air rifles over the years (all FAC / High power) from Daystate to FX. Following significant testing, tuning and thousands of rounds shot, I have yet to find a regulator that outperforms Huma! Huma simply make the most reliable and consistent regulators for PCP air rifles. All my PCP air rifles have Huma regulators fitted. Even brand new rifles instantly have a Huma regulator installed. Simply put, Huma regulators are industry leading. The build quality combined with the stability, consistency and reliability enable elite shooters to tune and have there rifles perform at the highest possible level. I could not recommend nor complement Huma regulators enough.
excellent (verified owner) –
Very nice regulator, in my case, works better/more stable, than the original from fx.
However, Id rather see a hex screw instead of the philips flat, because its easier to adjust the regulator with an allen key.
Andreas (verified owner) –
Excellent service and help
Mauro (verified owner) –
Hi,
Excellent product, top performance, the pressure regulator for FX Impact MKII top version, good seller!!
S.Milner (verified owner) –
ordered the Huma regulator for the impact mk11, it arrived about a week ago from Holland,assembled it and fitted in about 35 minutes,tested it and about 30 shots it had settled,I am well pleased with it.Thanks Huma.
Jonathan (verified owner) –
This regulator works just a Huma advertise. The Impact MK2 reg in my particular sub 12 ft/lb rifle had a tendency to creep up when not in use causing the first couple of shots to be way off, took quite a few seconds between shots to stabilise and most annoyingly had would settle between 45 to 55 bar and FPS spread was 30 to 40fps with sorted jsb pellets. The factory item was stripped and reinstalled twice but with no improvements. The Huma reg took just 20 or 30 shots to settle and seems absolutely bullet proof. Pellet speed spread is now maximum 9 FPS over 20 shots.
Saut roberto (verified owner) –
Good respon..and quick delivery