FX Wildcat MKIII Model >2021 Tuning Regulator By Huma-Air (Gen3)

Huma-Air Tuning Regulator For The FX Wildcat MKIII Model >2021

This FX Wildcat MKIII (MK3) tuning regulator made by Huma-Air is specially designed as a “one on one” replacement for the factory regulator.
It can be screwed into the pressure tube within a minute and replaces the original regulator. The Huma-Air FX Wildcat MKIII Model >2021 regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator.
Made of high grade aircraft aluminium in combination with bronze components.

Important note:

FX changed the model of the regulator of the Wildcat MKIII about half 2021. Currently it is not mentioned on the factory exploded view. The model of the regulator can be identified by it’s appearance in the pressure tube.
The 2020 model pressure tube has an approximate 5 mm hole drilled into the pressure tube and the regulator is slid inside the pressure tube. At the >2021 model the regulator is screwed into the pressure tube from the outside. This model is similar as used in the FX Impact and Maverick Gen3 model.
Please check the picture below how to identify your regulator model.

If you need the >2020 model, please click here

The benefits of the Huma-Air, FX Wiltcat MKIII Model >2021 tuning regulator are:

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• The fitting instructions are similair to the FX Impact Gen3 model

Huma-Air Quality Control

Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.

Pressure settings of the Huma-Air, FX Wildcat MKIII Model >2021 tuning regulator

We have currently two pressure ranges for the FX Wildcat MKIII regulator available:

• The extra high pressure range, 135-200 Bar what will suit all calibers within the high power range and for more extreme purposes and very good for the slugs and heavy pellets.
• A low pressure range, 60-135 Bar, what will suit the lower power rifles like the sub 12 ft/lbs versions perfectly.

Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.

Specifications

Shipping and Payment

We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.

You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.