FX Panthera, Dynamic, King Caliber Exchange Set

FX Panthera, Dynamic or FX King Caliber Exchange Set with V2 Dual Hole Transfer Port and High Flow Pin- or a High Flow Probe By Huma-Air

This caliber exchange set with V2 dual hole transferport and high flow pin probe makes it possible to change the caliber of your FX Panthera, FX Dynamic or FX King with the use of your excisting barrel sleeve and barrel shroud.
The set exists of our V2 dual hole transfer port, a liner lock nut, a high flow pin probe and the supporting o-rings for the optional FX liner inside the barrel sleeve (the liner itself is not included)
The V-shaped transfer opening makes sure you will have the maximum and smoothest air passage area. The middle support bridge divides the transfer port into a dual hole port and the middle bridge makes sure the pellet or slug nose cannot fall into the enlarged transferport hole, but will be guided smoothly by the middle bridge into the barrel.
The high flow pin probe or high flow probe can be used for slugs and pellets and makes sure you will have the maximum air flow trough the transferport towards the projectile. You can also select both model probes

IMPORTANT NOTES:

FX uses a medium strength tread locker to fixate the transferport to the barrel to prevent the barrel coming loose. We strongly advice you to use a tread locking adhesive like Loctite® 2400 also

Please check the FX Factory Exploded View before dismanteling the rifle

Barrel system A1-A18 runs thru a pressurized tube, faulty dismantling or faulty re-assembly Can cause serious injury to yourself and other living beings in the proximity. Can cause serious damage to the gun and property close by.
Locking screw A11 holds the barrel system which runs thru a pressurized tube, faulty dismantling or faulty re-assembly Can cause serious injury to yourself and other living beings in the proximity. Can cause serious damage to the gun and property close by.

Changing from a larger caliber to a smaller caliber does not require any modifications to your shroud or moderator, because the bore of the shroud and moderator will be large enough.
When you go upwards to a larger caliber, you need to check the bore of the shroud and moderator, and if needed open up the diameter of the bore of the shroud and moderator to match your new caliber;

Minimum bore diameter for shroud would be:
Cal .22 = 6,5 – 7 mm. bore
Cal .25 = 7,5 – 8 mm. bore
Cal. 30 = 8,5 – 9 mm. bore

Specifications

Shipping and Payment

We ship your items well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise). As a buyer, you are responsible for checking that this product is legal according to your local laws and regulations. Unless specifically stated otherwise, all our Air Guns, Air Gun Parts and Accessories are supplied in/for high-power versions.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.

More shipping info