
Benjamin Marauder FT Tuning Regulator
Huma-Air Tuning Regulator For The Benjamin Marauder FT Airrifle
Huma-Air Tuning Regulator For The Benjamin Marauder FT Airrifle
For the Benjamin Marauder airrifle we have designed a tuning regulator as replacement for the factory regulator.
It is a one -on- one swap, just remove the original regulator and replace it for our tuning regulator facing the scale lable towards the barrel end
The benefits of the Huma-Air, Benjamin Marauder FT Airrifle tuning regulator are:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- Maxiumum use of the air volume due to our ultra compact build.
When you order your Huma-Air, Benjamin Marauder FT Airrifle tuning regulator you will receive:
- Your regulator preset to your own wishes
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
- We will include a “Huma-Air regulated” breech sticker
- Fitting instructions as pdf download
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.
Pressure settings of your Benjamin Marauder Tuning Regulator
Your Benjamin Marauder tuning regulator comes preset on the most common pressure setting.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.
The output pressure range is stepless adjustable from 90-170 bar.
Specifications
Brand |
---|
Shipping and Payment
We ship your items well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise). As a buyer, you are responsible for checking that this product is legal according to your local laws and regulations. Unless specifically stated otherwise, all our Air Guns, Air Gun Parts and Accessories are supplied in/for high-power versions.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
Downloads
|
2 reviews for Benjamin Marauder FT Tuning Regulator
Alternative products
- Select options This product has multiple variants. The options may be chosen on the product page
Benjamin Marauder and Armada Magazine
€28,13(incl. 21% VAT)In stock
- Add to cart
Benjamin Marauder and Armada Pressure Gauge Replacement Set By Huma-Air
€27,95(incl. 21% VAT)In stock
- Add to cart
Extended Female Quick Connect Coupler Stainless Steel (Foster) to G1/8BSP
€17,96(incl. 21% VAT)In stock
- Add to cart
Huma-Air Thick Silicone Grease 20 ml.
€4,49(incl. 21% VAT)In stock
Bob (verified owner) –
Huma regulator really tightened up my shot groups and made my shot speed more consistent. Later, I added a lightweight hammer with a heavier spring making it more efficient and consistent. Now I am stacking my gen 2 .22 Marauder’s favorite pellet at 20 yards. Two other pellets result in one ragged hole. Looking forward to seeing what it can do at 50 or more yards.
I tried 130 bar, then 140 bar and finally settled on 133 bar with factory valve open 100%.
Shot spread was not impressive with stock settings. Now, accuracy is no longer a concern.
Shipping was also surprisingly very fast.
Cornelius (verified owner) –
Very fast shipping. Easy install into my Marauder F&T .177. Purchased to replace my problematic and difficult to tune factory regulator. As expected, just like all my other Huma regulators, results have been very consistent, even before a full break in of the reg. I used mine to boost the power of the FT Mrod. I set mine to 140 bar, using factory valve and transfer port, fully opened metering screw, hammer preload full ccw, hammer stroke about 7-10 turns in cw, to yield 19ft-lbs with 16.2 grain JSB exact beast pellets.