Snowpeak P35X Tuning Regulator By Huma-Air

P35X regulator: a replacement for the factory regulatorHuub Andriessen

The factory regulator in the P35X does its job, but consistency isn't its strong suit, and that's exactly where this upgrade makes a real difference. If you're shooting casually at shorter ranges and you're happy with your current shot-to-shot spread, honestly, save your money. But if you're serious about accuracy and want a stable pellet velocity across your full fill pressure, this is a straightforward swap: unscrew the old one, screw in ours, done. No drilling, no permanent modifications to your pressure tube. It works for both sub-12 ft/lbs and FAC setups.,My tip: order it preset to your target pressure, it saves you time and gets you shooting straight from the start.

Huma-Air Tuning Regulator For The Artemis P35X

For the Snowpeak P35X we have a tuning pressure regulator available that replaces the original chinese regulator of the P35X Air Gun.
It is an one-on-one replacement, just unscrew the old regulator and screw the tuning regulator and you are ready.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time

The benefits of the Huma-Air, Snowpeak P35X Tuning Regulator are:

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and  high power FAC models

When you order your Huma-air, Snowpeak P35X tuning regulator will receive:

• Your regulator preset to your own wishes
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
• We will include a “Huma-Air regulated” breech sticker
• Fitting instructions as pdf download

Huma-Air Quality Control

Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.

Pressure settings of the Huma-Air, Artemis P35 Tuning Regulator

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
t is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.