Anschutz 9015 HP Tuning Regulator 16 Joule 12 Ft.Lbs (Without Quick Fill)

Huma-Air Tuning Regulator + plenum For Anschutz 9015 HP 16 Joule

This unique Huma-Air tuning regulator is specially designed for tuning the Anschutz 9015 HP Airrifle and make it more suitable for  16 Joule / 12 ftlbs competition like HFT, FT etc. Due to our special adaptor the regulated air volume will be increased with no less than 8 CC making it possible to get the same output power with a lower regulator pressure and therefor a calmer shooting behavior and a higher shot count! 

This model requieres a front fill unit or quick fill unit at the front of your pressure tube. If your rifle is not equiped with this kind of fill posibility, please use our Regulator with Quickfill Set for the Anschutz

When you order your Huma-Air, Anschutz 9015 HP tuning regulator you will receive:

• Your Huma-Air tuning regulator preset to your own wishes.
• A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
• Regulator adaptor with extended plenum made of extremely tough 42Cr steel
• We will include a “Huma-Air Regulated” breech sticker.

The Huma Air Tuning Regulator with extended plenum ensures that you will get:

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• No more creeping or other issues!
• Calmer shooting behavior due to lower working pressure

After the regulator set is fitted and you have adjusted the rifle you will see a totally flat shotstring what will give your Anschutz 9015 HP an excellent consistency.

Pressure settings of the Huma-Air, Anschutz 9015 HP tuning regulator

The tuning regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range in the middle pressure range (MP: 70-165 bar output)

Huma-Air Quality Control

Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.